| 世聯北京翻譯公司關于電器控制系統翻譯案例,以下就是詳細的介紹。 電器控制系統 譯:Electric control system 1.控制柜、主控臺按現代標準設計,包括標準化的開關柜; 譯:The control cabinet and the main control desk shall be designed to state-of-the-art standards, including standardized switch cabinets; 2.擠壓筒各加熱段單獨控制回路; 譯:Separate control circuits shall be available for each heating zone of the container; 3.油泵故障預選,從控制臺進行,可以對擠壓機進行維護,而不必停機; 譯:Pump failure pre-selection shall be enabled from the control desk, which shall allow press operation to be maintained without interruption while maintaining the extrusion press; 4.馬達啟動從控制臺進行,可選手動或自動程序; 譯:Motor startup shall be available from the control desk, allowing selection of a manual or an automatic sequence; 5.油泵可進行節能切換,根據預定擠壓速度限定投入的油泵數量,從而以最佳范圍工作,減少泄漏損失,節約能源; 譯:Energy-saving switching shall be available for the oil pump. The number of pumps used during extrusion shall be limited in accordance with the pre-selected extrusion speed, thus maintaining the operating in an optimal range, reducing loss of oil due to leakage, and saving on energy; 6.擠壓力限定,以保護擠壓工具避免產生過高的比壓負荷,通過設定最大允許載荷防止工具損壞; 譯:The extrusion force shall be limited to protect the extrusion tools against excessively high specific loads and to prevent tool breakage by entering a maximum acceptable pressure limit; 【溫馨提示】世聯北京翻譯公司能夠提供各種類型翻譯服務,如果您有翻譯相關服務需求,可以隨時與本公司在線客服人員聯系,或者是撥打我們的服務熱線:010-64809262http://m.jxgdz.org.cn,世聯北京翻譯公司竭誠為您提供最優質的翻譯服務。 |




