| 世聯北京翻譯公司資深譯員對進氣口組件介紹翻譯，以下是具體案例。 Air Intake 進氣口 The air inlet plenum directs the combustion air into the air intake module. It is located in the gas turbine generator enclosure immediately forward of the gas generator. The plenum is supported by the common base frame, eliminating the need for any flexible connector. It provides a stabilisation zone for the filtered combustion air delivered through the combustion air intake silencer and ducting. Air flows between the inner and outer flares, with minimal airflow distortion and swirl, and then into the low-pressure compressor. 進氣室將助燃空氣導入到進氣組件中。進氣室就安裝在燃氣發電機前面的燃氣輪發電機機殼中。燃燒室安裝在公共底座上，這樣，就無需使用任何撓性連接器了。公共底座為流過燃燒進氣口消聲器和噴管的過濾助燃空氣提供了一個穩定區。流經喇叭形內外噴管的空氣流具有極小的氣流擾動和旋渦，這一穩定的空氣流隨后被輸送到低壓壓縮機中。 The outer flare is also the mounting point for two rings, each with compressor water wash nozzles that direct cleaning fluid into the first stages of gas turbine compressor blade. 外噴管也是兩個固定環的安裝點，每個固定環上都安裝了壓縮機沖洗水噴嘴，噴嘴將清洗液導入到第一級燃氣渦輪壓縮機的葉片上。 The ring closest to the gas turbine is used for off line washing and the ring closest to the mechanical auxiliaries compartment is used for on line washing. 離燃氣渦輪最近的固定環用于脫機沖洗，離輔助機械裝置室最近的固定環用于在線沖洗。 如果您有以上翻譯相關需求，可以隨時與我公司在線客服人員聯系，同時可以撥打我們的服務熱線：010-64809262 |
